TDA7296S Overview
There is a device embedded in Multiwatt-15 (Vertical, Bent and Staggered Leads) .Amp parts is recommended that the chip be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 15 termination.1-Channel (Mono) is the output configured for it.The device is of type Class AB .The 15 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Through Hole .Amp parts is powered by a voltage of ±10V~35V volts.1 channels are present on the device.Operation can be ensured by Depop, Mute, Short-Circuit and Thermal Protection, Standby .A temperature greater than 0°C~70°C TA should not be used.There are 15 pins present on this device.This is a member of the TDA7296 family.The electronic part is mounted in the way of Through Hole .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 60W kWh per hour.This electronic part has a Dual supply type.The device is powered by a voltage of +-24V volts.A maximum supply current of 65mA is achieved.
TDA7296S Features
Multiwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7296 family
60W kWh per hour
TDA7296S Applications
There are a lot of STMicroelectronics
TDA7296S audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
