TDA7263 Overview
There is a device embedded in Clipwatt-11 (Vertical, Bent and Staggered Leads) .Amp parts is recommended that the chip be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 11 termination.2-Channel (Stereo) is the output configured for it.The device is of type Class AB .The 11 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Through Hole .Amp parts is powered by a voltage of 10V~30V volts.2 channels are present on the device.Operation can be ensured by Depop, Mute, Short-Circuit and Thermal Protection .A temperature greater than 0°C~70°C TA should not be used.There are 11 pins present on this device.This is a member of the TDA7263 family.The electronic part is mounted in the way of Through Hole .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 12W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 10V .The maximum supply voltage (Vsup) is reached at 30V .This electronic part has a Single supply type.60mA external influences affect the amount of quiescent current consumed by this device.
TDA7263 Features
Clipwatt-11 (Vertical, Bent and Staggered Leads) package
11 pin count
TDA7263 family
12W kWh per hour
TDA7263 Applications
There are a lot of STMicroelectronics
TDA7263 audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
