TDA7253 Overview
The device is embedded in Clipwatt-11 (Vertical, Bent and Staggered Leads) .There is a package in the form of Tube .In addition, 11 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.Amp parts is an electrical device of type Class AB .The computer or other communication device has 11 pins, which are pronged contacts.The electronic component is mounted in the way of Through Hole .This electrical device operates at 10V~32V volts.This device is equipped with a total of 1 channels.During operation, Mute, Short-Circuit and Thermal Protection can be ensured.During operation, the temperature should not exceed 0°C~70°C TA .A total of 11 pins are present on the device.Amp parts is a member of the TDA7253 family.The electronic component is mounted in the way of Through Hole .There is a maximum output power of 10W kWh per hour from this electronic component.During normal operation, the supply voltage (Vsup) should remain above 10V .Upon reaching 32V , the maximum supply voltage (Vsup) is reached.Amp parts is an electronic part wAmp partsh a supply type of Single .
TDA7253 Features
Clipwatt-11 (Vertical, Bent and Staggered Leads) package
11 pin count
TDA7253 family
10W kWh per hour
TDA7253 Applications
There are a lot of STMicroelectronics
TDA7253 audio amplifiers applications.
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
