STM812SW16F Overview
A total of 4 terminals are used to mount this power management. Packaging is in the form of a Cut Tape (CT). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes TO-253-4, TO-253AA functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3.6V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 4 pins are located on this power management. There are 4 pins on the power managment ic. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. It is always advisable to use STM812, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 15μA can be used with this power management.
STM812SW16F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM812SW16F Applications
There are a lot of STMicroelectronics STM812SW16F Voltage Supervisors applications.
- Satellite navigation
- Functional modules
- Battery cars
- Telecommunications equipment
- Stable power system
- Multi-voltage system
- Digitally controlled LDO regulators circuit
- Battery cars
- Smartphones
- Radar
