STM805TM6F Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.6V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. The supply current of the power management is 60μA. To find similar IC managements from the manufacturer, you can always search by STM805. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly. A maximum supply temperature of 60μA can be used.
STM805TM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM805TM6F Applications
There are a lot of STMicroelectronics STM805TM6F Voltage Supervisors applications.
- DVR
- Precision measurement
- Power distribution systems of operating room
- Low voltage/high power - AI, GPU
- Military communications
- Refrigeration
- Battery cars
- Leakage protection
- Smart meter
- Transformer load monitoring equipment
