Name: STM708AM6F
Brand: STMicroelectronics
SKU: STM708AM6F
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Base Part Number	STM708
Output	Push-Pull, Totem Pole
Pin Count	8
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	25μA
Nominal Supply Current	60μA
Power Dissipation	320mW
Max Supply Current	60μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active High/Active Low
Voltage - Threshold	4.38V
Number of Voltages Monitored	1
Reset Timeout	160ms Minimum
Min Reset Threshold Voltage	4.25V
Max Reset Threshold Voltage	4.5V
Threshold Voltage	+4.38V
Length	4.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

STM708AM6F Product Details

STM708AM6F Overview

There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. A supply voltage of 5V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. Power managment ic pin count is 8. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 25μA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM708, which is the base power ics number. A maximum supply temperature of 60μA can be used with this power management.