STM707DS6E Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. There are a total of 8 pins on power management. There are 8 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 60μA is the recommended value. You can always use STM707, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 60μA.
STM707DS6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM707DS6E Applications
There are a lot of STMicroelectronics STM707DS6E Voltage Supervisors applications.
- Detection of phase sequence
- Leakage current detection
- Functional modules
- FPGA design
- Military electronics
- emergency room
- Linux and server computing
- Leakage protection
- Medical-specific insulation monitor
- Medical-specific isolation transformer
