Name: STM706PM6F
Brand: STMicroelectronics
SKU: STM706PM6F
Price: 1.78000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	STM706
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	40μA
Nominal Supply Current	60μA
Power Dissipation	320mW
Max Supply Current	60μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High
Voltage - Threshold	2.63V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	2.55V
Max Reset Threshold Voltage	2.7V
Undervoltage Threshold	2.55V
Overvoltage Threshold	2.7V
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

STM706PM6F Product Details

STM706PM6F Overview

As you can see, this power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 40μA for the power management. It is always advisable to use STM706, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management must be powered by 3/5V volts to function properly. Voltage supervisor can work with a supply temperature of 60μA at the most.