STM706PDS6F Overview
It is mounted through 8 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 40μA volt supply current. You can always use STM706, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 3/5V volts of power. The maximum supply temperature that PMIC chip can work with is 60μA.
STM706PDS6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
40μA operating supply current
STM706PDS6F Applications
There are a lot of STMicroelectronics STM706PDS6F Voltage Supervisors applications.
- Fire equipment power monitoring system
- Radar
- Household appliances
- External alarm
- Consumer electronics
- Battery-powered equipment
- Power communication system
- Cloud computing
- Network equipment
- Rechargeable batteries
