STM6905TGEDS6F Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 4 channels can be found on this supervisor. As a reference, this IC power includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your convenience. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 225. During operation, the power ic is supplied with a voltage of 3.3V. In a 5 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 16μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to STM6905, which is the base power ics number. The maximum supply temperature voltage supervisor can handle is 16μA.
STM6905TGEDS6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
16μA operating supply current
STM6905TGEDS6F Applications
There are a lot of STMicroelectronics STM6905TGEDS6F Voltage Supervisors applications.
- Leakage current detection
- Electronics installed in the vehicle
- Linux and server computing
- Kitchen appliances
- Insulation fault location system
- DSP
- Data storage applications
- Utility meter
- Unattended substation automation
- FPGA design
