STM6822RWY6F Overview
It is mounted through 5 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Open Drain or Open Collector. Supplied with a operating current of 12μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to STM6822, which is the base power ics number. The power management can work with a maximum supply temperature of 12μA.
STM6822RWY6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
STM6822RWY6F Applications
There are a lot of STMicroelectronics STM6822RWY6F Voltage Supervisors applications.
- Consumer electronics
- Functional modules
- Smartphones
- Detection of phase sequence
- Power distribution systems of operating room
- Sensitive sensors
- DVR
- Military electronics
- Insulation fault location system
- Power communication system
