STM6822MWY6F Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. 5 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 17μA. It is always advisable to use STM6822, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 17μA.
STM6822MWY6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
17μA operating supply current
STM6822MWY6F Applications
There are a lot of STMicroelectronics STM6822MWY6F Voltage Supervisors applications.
- Insulation fault location system
- Power distribution systems of CCU
- Battery-powered equipment
- Important electronics for automotive safety
- Stable power system
- Dash board
- Military communications
- Radio
- External alarm
- Fire equipment power monitoring system
