STM6778SYWB6F Overview
This power management consists of 6 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. Please refer to power management for SOT-23-6 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 3.3V supply voltages. When a supply voltage of 2 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 6. 6 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 35μA. A similar IC managements number of the manufacturer can always be found by using STM6778, the base power ics number. A maximum supply temperature of 35μA can be used with this power management.
STM6778SYWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6778SYWB6F Applications
There are a lot of STMicroelectronics STM6778SYWB6F Voltage Supervisors applications.
- Microcontroller system
- Detection of phase imbalance
- Solar power charger
- Refrigeration
- Display equipment
- Electrical fire monitoring system
- Insulation fault location system
- Smart meter
- Detection of phase sequence
- FPGA design
