STM6720TWWB6F Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached SOT-23-6 functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. In a 3 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 6 pins in it. There are 6 pins on the supervisor. It is recommended that Vsup should not be less than 800mV for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 35μA. It is always advisable to use STM6720, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 35μA.
STM6720TWWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6720TWWB6F Applications
There are a lot of STMicroelectronics STM6720TWWB6F Voltage Supervisors applications.
- Personal computers
- Fire equipment power monitoring system
- Detection of phase sequence
- Computer applications
- Dash board
- Sensitive sensors
- FPGA design
- Smart meter
- Satellite navigation
- Data storage applications
