STM32F765ZGT7

STM32F765ZGT7 Description

The high-performance Arm? Cortex?-M7 32-bit RISC processor of the STM32F765ZGT7 chip operates at a frequency of up to 216 MHz. A floating point unit (FPU) that supports Arm? single-precision and double-precision data-processing instructions and data formats is a feature of the Cortex?-M7 core. Additionally, it incorporates a memory protection unit (MPU) that improves program security and the whole range of DSP instructions.

The STM32F765ZGT7 device includes high-speed embedded memories with a Flash memory of up to 2 Mbytes, 512 Kbytes of SRAM (including 128 Kbytes of Data TCM RAM for critical real-time data), 16 Kbytes of Instruction TCM RAM (for essential real-time routines), and 4 Kbytes of backup SRAM available in the lowest power modes, as well as a wide range of enhanced I/Os and peripherals connected to two AHB buses, a 32-bit multi-AHB bus matrix and a multi-layer AXI interconnect supporting internal and external memories access.

All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, and two general-purpose 32-bit timers, a true random number generator (RNG).

STM32F765ZGT7 Features

• Low-power

– Sleep, Stop and Standby modes

– VBAT supply for RTC, 32×32 bit backup registers + 4 Kbytes backup SRAM

• 3×12-bit, 2.4 MSPS ADC: up to 24 channels

• Digital filters for sigma delta modulator (DFSDM), 8 channels / 4 filters

• 2×12-bit D/A converters

• General-purpose DMA: 16-stream DMA controller with FIFOs and burst support

• Up to 18 timers: up to thirteen 16-bit (1x lowpower 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer

• Debug mode

– SWD & JTAG interfaces

– Cortex?-M7 Trace Macrocell?

• Up to 168 I/O ports with interrupt capability

– Up to 164 fast I/Os up to 108 MHz

– Up to 166 5 V-tolerant I/Os

• Core: Arm? 32-bit Cortex?-M7 CPU with DPFPU, ART Accelerator? and L1-cache: 16 Kbytes I/D cache, allowing 0-wait state execution from embedded Flash and external

memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.

• Memories

– Up to 2 Mbytes of Flash memory organized into two banks allowing read-while-write

– SRAM: 512 Kbytes (including 128 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM

– Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories

• Dual mode Quad-SPI

• Graphics

– Chrom-ART Accelerator? (DMA2D), graphical hardware accelerator enabling enhanced graphical user interface

– Hardware JPEG codec

– LCD-TFT controller supporting up to XGA resolution

– MIPI? DSI host controller supporting up to 720p 30 Hz resolution

• Clock, reset and supply management

– 1.7 V to 3.6 V application supply and I/Os

– POR, PDR, PVD and BOR

– Dedicated USB power

– 4-to-26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC (1% accuracy)

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

STM32F765ZGT7 Applications

• Alarm systems, video intercom, and HVAC

• Home audio appliances

• Mobile applications, Internet of Things

• Wearable devices: smartwatches

• Motor drive and application control

• Medical equipment

• Industrial applications: PLC, inverters, circuit breakers

• Printers, and scanners