STM32F745ZET6 Description
STM32F745xx and STM32F746xx devices are based on a high-performance ARM Cortex - M7 32-bit RISC core and operate at up to 216 MHz. The Cortex - M7 kernel uses single floating point unit (SFPU) precision and supports all ARM single-precision data processing instructions and data types. It also implements a complete set of DSP instructions and a memory protection unit (MPU), thereby enhancing the security of the application. STM32F745xx and STM32F746xx devices integrate high-speed embedded memory with up to 1m bytes of flash memory, 320K bytes of SRAM (including 64K bytes of data Tcm RAM for critical real-time data), 16K bytes of instruction Tcm RAM (for critical real-time routines), and 4K bytes of backup SRAM (available in minimum power mode) And various enhanced I APB O and peripheral devices connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi-layer AXI interconnect that supports internal and external memory access.
STM32F745ZET6 Features
? Core: ARM? 32-bit Cortex?-M7 CPU with FPU,
adaptive real-time accelerator (ART
Accelerator?) and L1-cache: 4KB data cache
and 4KB instruction cache, allowing 0-wait
state execution from embedded Flash memory
and external memories, frequency up to
216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz
(Dhrystone 2.1), and DSP instructions.
? Memories
– Up to 1MB of Flash memory
– 1024 bytes of OTP memory
– SRAM: 320KB (including 64KB of data TCM RAM for critical real-time data) +
16KB of instruction TCM RAM (for critical
real-time routines) + 4KB of backup SRAM
(available in the lowest power modes)
– Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM,
SDRAM/LPSDR SDRAM, NOR/NAND
memories
? Dual mode Quad-SPI
? LCD parallel interface, 8080/6800 modes
? LCD-TFT controller up to XGA resolution with
dedicated Chrom-ART Accelerator? for
enhanced graphic content creation (DMA2D)
? Clock, reset and supply management
– 1.7 V to 3.6 V application supply and I/Os
– POR, PDR, PVD and BOR
– Dedicated USB power
– 4-to-26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC (1% accuracy)
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
? Low-power
– Sleep, Stop and Standby modes
– VBAT supply for RTC, 32×32 bit backup
registers + 4KB backup SRAM
? 3×12-bit, 2.4 MSPS ADC: up to 24 channels
and 7.2 MSPS in triple interleaved mode
? 2×12-bit D/A converters
STM32F745ZET6 Applications
? Motor drive and application control,
? Medical equipment,
? Industrial applications: PLC, inverters, circuit breakers,
? Printers, and scanners,
? Alarm systems, video intercom, and HVAC,
? Home audio appliances,
? Mobile applications, Internet of Things,
? Wearable devices: smartwatches.
