STM32F334C6T6 Description
The STM32F334x4/6/8 family incorporates the high-performance Arm? Cortex?-M4 32-bit RISC core operating at up to 72 MHz frequency embedding a floating point unit (FPU), high-speed embedded memories (up to 64 Kbytes of Flash memory, up to 12 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.
The STM32F334x4/6/8 microcontrollers offer two fast 12-bit ADCs (5 Msps), up to three ultra-fast comparators, an operational amplifier, three DAC channels, a low-power RTC, one high-resolution timer, one general-purpose 32-bit timer, one timer dedicated to motor control, and four general-purpose 16-bit timers. They also feature standard and advanced communication interfaces: one I2C, one SPI, up to three USARTs, and one CAN.
STM32F334C6T6 Features
Core: Arm? Cortex?-M4 32-bit CPU with FPU
(72 MHz max), single-cycle multiplication and
HW division DSP instruction
Memories
– Up to 64 Kbytes of Flash memory
– Up to 12 Kbytes of SRAM with HW parity
check
– Routine booster: 4 Kbytes of SRAM on
instruction and data bus with HW parity
check (CCM)
CRC calculation unit
Reset and supply management
– Low-power modes: Sleep, Stop, Standby
– VDD,VDDA voltage range: 2.0 to 3.6 V
– Power-on/Power-down reset (POR/PDR)
– Programmable voltage detector (PVD)
– VBAT supply for RTC and backup registers
Clock management
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC (up to 64 MHz with PLL
option)
– Internal 40 kHz oscillator
Up to 51 fast I/O ports, all mappable on
external interrupt vectors, several 5 V-tolerant
Interconnect matrix
7-channel DMA controller
