STM1403ASMQ6F Overview
It is mounted through 16 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 16-VFQFN Exposed Pad functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3.3V. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 16 pins on IC management. Pin count of the power management is 16. There should be a minimum voltage supply (Vsup) of 2.2V for this PMIC. There should be no more than 3.6V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 60μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. You can always use STM1403, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 2.5/3.3V volts to function properly. At the most, voltage supervisor can work with a supply temperature of 60μA.
STM1403ASMQ6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.2V
60μA operating supply current
STM1403ASMQ6F Applications
There are a lot of STMicroelectronics STM1403ASMQ6F Voltage Supervisors applications.
- Refrigeration
- Personal computers
- Computer applications
- Digitally controlled LDO regulators circuit
- Insulation fault location system
- Solar power charger
- DSP
- Display equipment
- Unattended substation automation
- Power distribution systems of CCU
