PSD834F2-90M Overview
There is a package 52-QFP containing the ICs.The package Tray contains integrated circuit.Surface Mount is used for mounting integrated circuit.There are numerous integrated circuits that make use of this type of Programmable Peripherals IC.In order to find similar integrated circuit systems, you should search for the family PSD834F.It is appropriate to apply the ICs to 8-Bit MCU Peripherals.There are 52 terminations on the ICs solutions.A ICs applications has a total of 52 pins.5V is the correct setting for this logic gate IC.Surface Mount would be a good mounting option for this ICs application.In order to make the most of it, it is recommended to use it when the integrated circuit chip's temperature is below 70°C.It is not recommended to operate the integrated circuit system below 0°C operating temperature.The pins total 52.This integrated circuit can operate at 5.5V supply voltage.There should be no voltage lower than 4.5V for this integrated circuit.The integrated circuit system falls under the subcategory Other Microprocessor ICs.A voltage of 5V can be delivered by logic gate IC.Frequency 90GHz is set on the logic IC.This integrated circuit chip has a FLASH memory type.The size of this memory counts to 1.9MB.There are 4 ports embedded on the logic ICs.
PSD834F2-90M Features
Applications : 8-Bit MCU Peripherals
Supply power of 5V
Memory Type : FLASH
Memory Size: 1.9MB
PSD834F2-90M Applications
There are a lot of STMicroelectronics PSD834F2-90M Specialized ICs applications.
- PDAs and Palmtop Devices
- Isolated CAN Bus Interface
- Industrial Networks
- DeviceNet Applications
- Lossless generation of zero crossing signal
- All converters requiring very low standby power
- Appliances requiring ErP Lot 6 compliance
- Adapters requiring ultra low no-load consumption
- Portable Instruments
- μP Switch Interfacing
