PSD813F1VA-15M Overview
It can be seen that the ICs has been enclosed within the package 52-QFP.A package called Tray uses integrated circuit.Surface Mount is used to mount integrated circuit.The Programmable Peripherals IC type is available in many integrated circuits.The PSD813F family can be searched for similar integrated circuit systems.8-Bit MCU Peripherals is the appropriate place for the ICs to be applied.The total number of terminations on the ICs solutions is 52.A ICs applications has a total of 52 pins.It is recommended to run this logic gate IC at 3.3V.A suggested mounting method for this ICs application would be to mount it by Surface Mount.You are advised to utilize it when the integrated circuit chip's temperature is below 70°C.Operating temperatures should not be lower than 0°C.integrated circuit chip has 52 pins in total.A supply voltage of 5.5V can be used with this integrated circuit.This integrated circuit needs a voltage not less than 4.5V.150GHz is the logic IC's frequency.This integrated circuit chip has FLASH as its memory type.As a result, this memory counts to 976.6kB in terms of its size.
PSD813F1VA-15M Features
Applications : 8-Bit MCU Peripherals
Memory Type : FLASH
Memory Size: 976.6kB
PSD813F1VA-15M Applications
There are a lot of STMicroelectronics PSD813F1VA-15M Specialized ICs applications.
- Adapters requiring ultra low no-load consumption
- Isolated CAN Bus Interface
- Reference Design License Management
- Cell Phones
- Portable Instruments
- Authentication of Medical Sensors and Tools
- DeviceNet Applications
- μP Switch Interfacing
- Printer Cartridge Identification and Authentication
- MP3 Players
