PSD4235G2V-12UI Overview
The ICs is enclosed in the package 80-LQFP.It is used as integrated circuit system of the Tray package.Surface Mount is used for mounting integrated circuit.Various integrated circuits use this type of Programmable Peripherals IC.Similar integrated circuit systems can be found by searching for the PSD4235 family.In 16-Bit MCU Peripherals, the ICs is appropriate.80 terminations were found on the ICs solutions.There are 80 pins available in the ICs applications.3.3V should be the operating mode for this logic gate IC.It's recommended that you utilize it when the integrated circuit chip's temperature is below 85°C.No operating temperature lower than -40°C should be used for the integrated circuit system.80 pins are on integrated circuit chip in total.This integrated circuit system falls under the subcategory Other Microprocessor ICs.Voltage can be delivered at 3.3V.A 3.6V operating voltage is rated for the application specific integrated circuit.It is set to 120GHz for the frequency of the logic IC.This integrated circuit chip has FLASH as its memory type.As a result, this memory counts to 3.8MB in terms of its size.The logic ICs has 7 ports embedded.
PSD4235G2V-12UI Features
Applications : 16-Bit MCU Peripherals
Supply power of 3.3V
Memory Type : FLASH
Memory Size: 3.8MB
PSD4235G2V-12UI Applications
There are a lot of STMicroelectronics PSD4235G2V-12UI Specialized ICs applications.
- All converters requiring very low standby power
- Secure Management of Limited Use Consumables
- μP Switch Interfacing
- Adapters requiring ultra low no-load consumption
- PC-Based Instruments
- Industrial Networks
- Peripheral Authentication
- Lossless generation of zero crossing signal
- Message Security
- Digital Still Cameras
