M74HCT574RM13TR Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74HCT series. There should be no greater frequency than 50MHzon its output. D latch consists of 1 elements. There is 4μA quiescent consumption. Terminations are 20. The M74HCT574 family contains this object. The D flip flop is powered by a voltage of 5V . Its input capacitance is 5pF farads. In this case, the D flip flop belongs to the HCTfamily. This electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to Bus Driver/Transceiver base part number. An electronic part designed with 8bits is used in this application. Using 8 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power. The flip flop contains 2ports. High efficiency requires the supply voltage to be maintained at 5V. It is designed with 3 output lines.
M74HCT574RM13TR Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
M74HCT574RM13TR Applications
There are a lot of STMicroelectronics M74HCT574RM13TR Flip Flops applications.
- CMOS Process
- EMI reduction circuitry
- Clock pulse
- Automotive
- Reduced system switching noise
- Shift Registers
- Circuit Design
- Single Up Count-Control Line
- Functionally equivalent to the MC10/100EL29
- Frequency Divider circuits
