M74HC73RM13TR Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. Negative Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. The JK flip flop operates at 2V~6Vvolts. A temperature of -55°C~125°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as JK Type. JK flip flop is a part of the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 80MHz. It consumes 2μA of quiescent current without being affected by external factors. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to M74HC73 family. Power is provided by a 4.5V supply. There is 5pF input capacitance for this T flip flop. This D flip flop belongs to the family of HC/UH. Surface Mount mounts this electronic component. This board is designed with 14pins on it. There is a clock edge trigger type of Negative Edgeon this device. The part you are looking for is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. Its superior flexibility is attributed to its use of 2 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. MASTER SLAVE OPERATIONis also one of its characteristics.
M74HC73RM13TR Features
Tape & Reel (TR) package
74HC series
14 pins
M74HC73RM13TR Applications
There are a lot of STMicroelectronics M74HC73RM13TR Flip Flops applications.
- Buffer registers
- Balanced Propagation Delays
- Balanced 24 mA output drivers
- Frequency division
- Individual Asynchronous Resets
- Matched Rise and Fall
- Computing
- Shift registers
- Frequency Dividers
- Patented noise
