M74HC564B1R Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. The Tubepackage contains it. There is a Tri-State, Invertedoutput configured with it. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. A temperature of -55°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 90MHzshould be the maximum output frequency. There are 1 elements in it. As a result, it consumes 4μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The M74HC56 family contains this object. It is powered by a voltage of 4.5V . Input capacitance of this device is 5pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. In this case, the electronic component is mounted in the way of Through Hole. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. It reaches 6Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. To achieve this superior flexibility, 8 circuits are used. There are 2/6V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There are 3 output lines in this JK flip flop.
M74HC564B1R Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
M74HC564B1R Applications
There are a lot of STMicroelectronics M74HC564B1R Flip Flops applications.
- 2 – Bit synchronous counter
- Buffered Clock
- Event Detectors
- Load Control
- Latch-up performance
- Patented noise
- Data storage
- Data Synchronizers
- Count Modes
- ESCC
