M74HC4060B1R Overview
16-DIP (0.300, 7.62mm)is a package in which this device is packaged. There are 16 terminations used for its configuration. 4.5Vis enabled to operate in an extremely flexible manner due to its supply voltage. In all, there are 16 pins on each component. As [0], it is packaged. A circuit is connected to other components by 16pins. To mount it, use the method of [0]. The HC/UHfamily includes it. As a member of the 74HCseries, it is ideal for a wide range of applications. It is adopted that the logic type is [0]. -55°C~125°Cis the recommended operating temperature. There is a mounting type of Through Holeon this device. Providing a voltage of 2V~6Vensures higher reliability of operation. There are 14 bits stored in each element of the array. Its base part number, [0], contains more related parts. To operate, it requires a supply voltage of 5V volts. It is possible to supply the device with the minimum supply voltage (Vsup) of 2V. A frequency of 65MHzis used for operation. Typically, the supply voltage (Vsup) is limited to 6V. With 10output lines, it is equipped with. A total of 2outputs have been received by the system.
M74HC4060B1R Features
Embedded in the 16-DIP (0.300, 7.62mm) package
14 bits per element
Operating supply voltage of 5V
Frequency of 65MHz
M74HC4060B1R Applications
There are a lot of STMicroelectronics
M74HC4060B1R Counters & Dividers applications.
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
- Clocks
- Up Counters
