M74HC4053TTR Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -55°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. There is an electrical component included in the 16 series. Multiplexers built on a SPDT switching circuit are built. 3 circuits are used in this analogue multiplexer. M74HC405 can be used to search for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. An effective Dual supply digital multiplexer. The lowest voltage the electronic part should receive is 2V. The analogue multiplexer could operate on 8μA current. Despite this switch device's dual supply capability, its voltage should not exceed 6V. The voltage should be at least 1V if you are using dual power supplies. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. The electrical component supports 6 inputs. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths.
M74HC4053TTR Features
2 Channels
Switch Circuit: SPDT
8μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 120MHz
M74HC4053TTR Applications
There are a lot of STMicroelectronics M74HC4053TTR Analog Switches & Multiplexers ICs applications.
- SDH
- Precision instrumentation
- DSLAMs
- Cable Modem
- Cellular phones
- RGB switches
- Cable PC
- Signal routing between systems
- Fiber In The Loop (FITL)
- Remote wireless modules
