Name: M40SZ100WMQ6E
Brand: STMicroelectronics
SKU: M40SZ100WMQ6E
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Power Management Circuits
Max Power Dissipation	1W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Base Part Number	M40SZ
Output	Open Drain or Open Collector
Pin Count	16
Power Supplies	3/3.3V
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	2.7V
Operating Supply Current	500μA
Nominal Supply Current	500μA
Power Dissipation	1W
Max Supply Current	500μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	2.6V
Number of Voltages Monitored	1
Reset Timeout	40ms Minimum
Length	9.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Lead Free

M40SZ100WMQ6E Product Details

M40SZ100WMQ6E Overview

A total of 16 terminals are used to mount this power management. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.154, 3.90mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 16 pins on power management. Power managment ic pin count is 16. IC management can only work with a supply voltage of 2.7V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.6V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 500μA volt supply current. You can always use M40SZ, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 3/3.3V power to work. At the most, voltage supervisor can work with a supply temperature of 500μA.