M40SZ100WMQ6 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SO functions for you to refer to. A supply voltage of 3V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. In total, the power management has 16 pins in it. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 3.6V volts in this IC power. In order to maintain a stable supply current for the power management, 500μA is the recommended value. Besides the IC types mentioned above, the power management system also includes other types such as POWER SUPPLY SUPPORT CIRCUIT. It requires 3/3.3V watts of power to operate this voltage supervisor.
M40SZ100WMQ6 Features
Minimum supply voltage of 2.7V
500μA operating supply current
M40SZ100WMQ6 Applications
There are a lot of STMicroelectronics
M40SZ100WMQ6 Voltage Supervisors applications.
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
- Stable power system
- Sensitive sensors
- Efficient information transmission
- Functional modules
- Consumer electronics
