M27C512-10C6TR Overview
A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel (TR) case as well. The file is embedded in a 32-LCC (J-Lead) case. On the chip, there is an 512Kb 64K x 8 memory, which is the size of the chip's memory. There is a mainstream memory format used by this device, which is called EPROM-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. With 4.5V~5.5V as the supply voltage, it is capable of handling memory ics. The recommended mounting type for this device is Surface Mount. It is planted on the chip with 32 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. A voltage of 5V is required for the operation of this memory device. In order to select similar parts, typical manufacturers refer to M27C512 as the device's base part number. The memory device is enclosed in a package with an 32-pin connector. A memory device like this has 32 pins, indicating that there are 32 memory locations on the device. This memory runs on an 5V operating supply voltage. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. There is a nominal supply current rating of 50mA for this memory component. Talking about power supplies, this memory chip requires merely 5V. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. OTP ROMs components are usually considered types of this component.
M27C512-10C6TR Features
Package / Case: 32-LCC (J-Lead)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
M27C512-10C6TR Applications
There are a lot of STMicroelectronics M27C512-10C6TR Memory applications.
- networking
- multimedia computers
- nonvolatile BIOS memory
- mainframes
- Cache memory
- Camcorders
- networks
- telecommunications
- supercomputers
- cell phones
