M27C256B-90C1 Overview
Non-Volatile is its memory type. In addition, memory ics is available in a Tube case as well. 32-LCC (J-Lead) case encloses it. Memory size on the chip is 256Kb 32K x 8. EPROM-format memory is used in this device, which is a mainstream design. A wide operating temperature range makes this device ideal for a variety of demanding applications. A voltage of 4.5V~5.5V can be supplied to memory ics. It is recommended that the mounting type be Surface Mount. The chip is terminated with 32 terminations. The comprehensive working procedure is supported by 1 functions in this part. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. A device's base part number, M27C256, is often used in order to identify similar components. An 32-pin package is used to package this memory device. There are 32 pins on this memory device, which indicates it has 32 memory locations in it. There is a note indicating that this memory chip operates at an 5V volt supply voltage. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. There is a nominal supply current rating of 50mA for this memory component. In terms of power requirements, this memory chip uses only 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. Usually, this memory ics is regarded as a type of OTP ROMs. Using this memory chip, you will be able to process data at a speed of 90GHz times per second. Optimal supply current for this device is 30mA amps.
M27C256B-90C1 Features
Package / Case: 32-LCC (J-Lead)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
Freguency at 90GHz
90GHz terminals
M27C256B-90C1 Applications
There are a lot of STMicroelectronics M27C256B-90C1 Memory applications.
- eSRAM
- hard disk drive (HDD)
- data buffer
- nonvolatile BIOS memory
- eDRAM
- graphics card
- cell phones
- embedded logic
- DVD disk buffer
- Camcorders
