LM311DT Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type of this comparator is DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL .The part is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 15V .This is a typical comparator of type General Purpose .Currently, it consists of only 1 elements.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search LM311 for more pin-to-pin solutions.A quiescent current of 7.5mA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 7.5mA .An excess of current supply over 6mA could result in malfunction of the comparator.You are allowed to input a maximum current of 250nA into the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.For normal operation, the operating supply voltage must be 15V .
LM311DT Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 7.5mA
Voltage Gain: 106.02dB
LM311DT Applications
There are a lot of STMicroelectronics
LM311DT linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
