LM211N Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.Output type of this comparator is DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL .The part is shipped by Tube .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 15V .This is a typical comparator of type General Purpose .Currently, it consists of only 1 elements.The device includes 8 pins.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at -40°C~105°C in order to prevent malfunction.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search LM211 for more pin-to-pin solutions.A quiescent current of 6mA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 6mA .An excess of current supply over 7.5mA could result in malfunction of the comparator.You are allowed to input a maximum current of 100nA into the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.
LM211N Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211N Applications
There are a lot of STMicroelectronics
LM211N linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
