Name: L9822EPD
Brand: STMicroelectronics
SKU: L9822EPD
Price: 7.38000 USD
Availability: InStock

new-10%

L9822EPD

Manufacturer part number:L9822EPD

Manufacturer:STMicroelectronics

Description:5V PMIC L9822 20 Pin 2MHz 5V 20-SOIC (0.433, 11.00mm Width) Exposed Pad

Case Package:SOT-23

Datasheet:L9822EPD Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.433, 11.00mm Width) Exposed Pad
Number of Pins	20
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
JESD-609 Code	e3
Feature	Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Resistance	550mOhm
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Peripheral Drivers
Technology	BCD
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Frequency	2MHz
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	L9822
Pin Count	20
Number of Outputs	8
Max Output Current	1.05A
Operating Supply Voltage	5V
Power Supplies	5V
Number of Channels	2
Interface	SPI
Max Supply Voltage	7V
Min Supply Voltage	-700mV
Nominal Supply Current	10mA
Output Configuration	Low Side
Output Current	1A
Turn On Delay Time	10 μs
Switch Type	Relay, Solenoid Driver
Rise Time	50ns
Fall Time (Typ)	50 ns
Nominal Input Voltage	5V
Turn-Off Delay Time	10 μs
Ratio - Input:Output	1:8
Voltage - Load	4.5V~5.5V
Driver Number of Bits	8
Fault Protection	Current Limiting (Fixed)
Output Peak Current Limit-Nom	1.05A
Rds On (Typ)	550m Ω
Built-in Protections	TRANSIENT; OVER CURRENT
Height Seated (Max)	3.6mm
Length	15.9mm
Width	11mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

L9822EPD Product Details

L9822EPD Overview

As you can see, it's packaged in the way of a Tube.There is a package for it in the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.It owns Relay, Solenoid Driver switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 8 outputs.There are Status Flag features available on the LED driving board.It comes under the family of L9822.It has a total of 20 terminations.The 20 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 1.05A in order to meet the operation requirements.Supply voltages of 5V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.In total, it has 20 pins.The LED driver has 550mOhm resistance.It is set to 1A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In total, 2 channels are available.This part is powered by 5V.In order to optimize the efficiency of the supply voltage, it should be set to 5V.There is a maximum voltage of 7VV that it can handle.Supply voltages as low as -700mVV are possible.