Name: L9362
Brand: STMicroelectronics
SKU: L9362
Availability: InStock

new-10%

L9362

Manufacturer part number:L9362

Manufacturer:STMicroelectronics

Description:5V N-Channel 0.65mm PMIC L9362 36 Pin 5V PowerSO-36 Exposed Bottom Pad

Case Package:SOT-23

Datasheet:L9362 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Lifecycle Status	ACTIVE (Last Updated: 8 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	PowerSO-36 Exposed Bottom Pad
Number of Pins	36
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	36
ECCN Code	EAR99
Resistance	250mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Peripheral Drivers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	L9362
Pin Count	36
Number of Outputs	4
Output Type	N-Channel
Max Output Current	5A
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	5V
Interface	SPI
Nominal Supply Current	11mA
Output Configuration	Low Side
Max Supply Current	80mA
Propagation Delay	100 ns
Turn On Delay Time	100 ns
Switch Type	General Purpose
Output Current per Channel	3A
Ratio - Input:Output	1:1
Voltage - Load	4.5V~5.5V
Driver Number of Bits	4
Fault Protection	Open Load Detect, Over Temperature
Turn On Time	10 µs
Output Peak Current Limit-Nom	3A
Rds On (Typ)	250m Ω
Turn Off Time	10 µs
Built-in Protections	TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction	SINK
Height Seated (Max)	3.6mm
Length	15.9mm
Width	11mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

L9362 Product Details

L9362 Overview

Tube is the way it's packaged.The PowerSO-36 Exposed Bottom Pad package contains it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.It has a maximum output voltage of N-Channel volts.The L9362 family consists of this type.A total of 36 terminations have been found in it.It is necessary to use the 36 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 5A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 36 pins.Lighting drivers with 250mOhm resistance are used.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this case, Vsup (maximum supply voltage) is set to 5.5V.In this part, the power supply is set to 5V.It has a maximum current requirement of 80mA.