L6208PD013TR Overview
The design contains a Tape & Reel (TR)package.This part is packed in a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.Drivers controllers is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.This device is capable of supplying voltages up to 8V~52V volts.Operation temperature ranges from -25°C~125°C TJ.A total of 36terminations are available in this part.There is the option of applying the voltage to the load at the rate of 8V~52V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 48V.There is a recommended mounting method of Surface Mount.Maintain a current of 2.8A for the part output.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.This can be determined by looking at the L6208 part number.36pins are present on the device.There are a total of 2outputs available.A voltage of 48V is used as the supply voltage for this driver.Continually maintains the output voltage at 52V.Continually maintains the output voltage at STSPIN L62.For the purposes of meeting its operation requirements, the maximum output current reaches [0].Controller ic uses 10mAas the supply current for Controller ics operation.4channels are available.
L6208PD013TR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6208 number
designed with 2 outputs
L6208PD013TR Applications
There are a lot of STMicroelectronics
L6208PD013TR motor drivers applications.
- Dash
- Footwell lighting
- Indicator
- Telltale lights
- Infotainment backlighting
- Tail lights
- Turn signals
- Brake lights
- CHMSL (center high-mount stop lamps)
- parking lights
