HCF4024M013TR Overview
The device is packaged in the 14-SOIC (0.154, 3.90mm Width)type. This configuration uses 14terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. All component pins are equal to 14. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 14pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000series, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 7bits for each element. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number HCF4024. For its packaging, TAPE AND REELis employed. As low as 3V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 20V (Vsup). There are 1 input lines that allow binary data to be input in the form of an on/off signal.
HCF4024M013TR Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
7 bits per element
HCF4024M013TR Applications
There are a lot of STMicroelectronics
HCF4024M013TR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
