E-L6910TR Overview
It comes in a 16-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 5V~12V. Qualified to work in a -40°C~150°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Frequency Control, Phase Control, Power Good, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . An array of 16 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. You can find other relevant dc to dc converter ics by searching "L6910". There are 16 pins on switching converter. Input voltage of dc dc voltage regulator must be 5V. As determined by the test statistics, the output voltage of DC regulator is 913mV. The dc dc regulator's usual output current is 1.3A, which should be noted down when you start a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. The switching controller works at a frequency of 1MHz. It is suggested that users apply 12V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
E-L6910TR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
E-L6910TR Applications
There are a lot of STMicroelectronics E-L6910TR DC to DC converter applications.
- Computed tomography (CT)
- Nuclear power plants
- Grinders
- Production lines
- Smoke exhaust equipment
- Automatic testing equipment
- Scientific testing
- Product testing
- Gear/thread machining machines
- Domestic water pumps
