74VHC273MTR Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A voltage of 2V~5.5Vis required for its operation. In the operating environment, the temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74VHCseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 110MHz. A total of 1elements are present in it. This process consumes 4μA quiescents. Terminations are 20. This D latch belongs to the family of 74VHC273. A voltage of 3.3V is used to power it. Its input capacitance is 7pFfarads. This D flip flop belongs to the family of AHC/VHC. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. Vsup reaches its maximum value at 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility of this product is achieved by using 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A power supply of 2/5.5Vis required to operate it.
74VHC273MTR Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC273MTR Applications
There are a lot of STMicroelectronics 74VHC273MTR Flip Flops applications.
- Individual Asynchronous Resets
- Control circuits
- Frequency Divider circuits
- Guaranteed simultaneous switching noise level
- Consumer
- Set-reset capability
- EMI reduction circuitry
- Common Clocks
- Registers
- Count Modes
