74V2T66STR Overview
Due to the fact that it is provided in the SOT-23-8, digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Mounting is performed using Surface Mount.Bilateral, FET Switches is the analog IC that the multiplexers uses.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74V series can be used in a wide range of applications.Its basic configuration includes terminations in the 8 range.You can also find related parts by using its logic switch base part number of 74V2T66.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 8 components that can be connected to each pin.As the end of conductors, it uses GULL WING.In this case, the supply type is Dual, Single.With 8 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 4.5V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.mux switch's normal operation requires the power supply of 5V.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.It is provided with 2 inputs.A resistance of 17Ohm is used to operate it.A total of 1 channels are used for transmission in the turn signal switch's circuit.
74V2T66STR Features
Supplied in the SOT-23-8 package
Adopting a supply type of Dual, Single
Power supplies of 5V
74V2T66STR Applications
There are a lot of STMicroelectronics 74V2T66STR Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Electronics industry
- Audio transmission
- Relay
- Steel plants
- Home automation system
- Signal router
- HDMI applications
- Data bus control
- Data-routing applications
