Name: 74V2G66STR
Brand: STMicroelectronics
SKU: 74V2G66STR
Availability: InStock

new-10%

74V2G66STR

Manufacturer part number:74V2G66STR

Manufacturer:STMicroelectronics

Description:4ns, 7.5ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74V2G66 8 Pins 100nA 3.3V SOT-23-8

Case Package:SOT-23

Datasheet:74V2G66STR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-8
Number of Pins	8
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	10Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	74V2G66
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Polarity	Non-Inverting
Power Supplies	3.3/5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	7.5 ns
Supply Type	Single
Turn-Off Delay Time	4 ns
-3db Bandwidth	180MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	3pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	4ns, 7.5ns
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	7ns
Switch-off Time-Max	10ns
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO/NC
Height Seated (Max)	1.45mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74V2G66STR Product Details

74V2G66STR Overview

The electrical component comes in SOT-23-8 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. In total, there have been 8 terminations. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. A total of 8 pins are injected into the body of the electronic part. SPST - NO switching circuits are used in these analog switch ics. Try searching for 74V2G66 variants of the analog switch ic. This digital multiplexer has 10Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. A voltage higher than 1μA may cause damage to the switch multiplexer. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.