74LCX574TTR Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~3.6V. It is operating at a temperature of -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74LCX series. A frequency of 150MHzshould be the maximum output frequency. D latch consists of 1 elements. Terminations are 20. You can search similar parts based on 74LCX574. The D flip flop is powered by a voltage of 2.7V . Its input capacitance is 6pF farads. This D flip flop belongs to the family of LVC/LCX/Z. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. The flip flop is designed with 8bits. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The superior flexibility is achieved through the use of 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 2 ports embedded in the flip flops. With an output current of 24mA, it is possible to design the device in any way you want. To operate, the chip has a total of 3 output lines. There is a consumption of 10μAof quiescent current from it.
74LCX574TTR Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
74LCX574TTR Applications
There are a lot of STMicroelectronics 74LCX574TTR Flip Flops applications.
- Clock pulse
- QML qualified product
- Memory
- ATE
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
- Count Modes
- Consumer
- Counters
- Computers
