74AC273MTR Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. There is a Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. The operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74ACseries of FPGAs. You should not exceed 250MHzin its output frequency. In total, it contains 1 elements. It consumes 8μA of quiescent It has been determined that there have been 20 terminations. Members of the 74AC273family make up this object. It is powered by a voltage of 3.3V . Its input capacitance is 4pF farads. ACis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 8bits are used in this part. 6Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. To achieve this superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 3.3/5V power supplies attached to it.
74AC273MTR Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
3.3/5V power supplies
74AC273MTR Applications
There are a lot of STMicroelectronics 74AC273MTR Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
- Safety Clamp
- Functionally equivalent to the MC10/100EL29
- Bus hold
- Frequency Divider circuits
- Storage registers
- Power down protection
- CMOS Process
- Counters
