W158HT Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. Embedded in the 56-BSSOP (0.295, 7.50mm Width) package is this Clock PLL. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. 56 terminations can be found in frequency synthesizer. The supply voltage of 3.3V allows for high efficiency. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. RF synthesizers based on this clock provide frequencies up to 133MHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. There are 2.375V~3.465V available for use with this clock PLL. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. In particular, this clock PLL is designed to be used with microprocessors. These related electrical parts are available for the base part number W158. A 56 pin is available on the clock PLL. 24 signal outputs allow for maximi24ation of output frequency. I would like to briefly introduce you to a 2-element frequency synthesizer that performs well with low jitter.
W158HT Features
Available in the 56-BSSOP (0.295, 7.50mm Width)
Supply voltage of 3.3V
W158HT Applications
There are a lot of Silicon Labs W158HT Clock Generators applications.
- Cellular/4G
- FMCW Radar
- Signal frequency synthesis circuits
- Automatic control
- CPUs
- MRI
- Smartphones
- Radiotelephones
- Skew suppression
- FM demodulation networks for FM operations
