SL2309ZI-1HT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. As a result, frequency synthesizers can be found to contain 16 terminations. This electronic frequency generator requires a voltage of 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. RF synthesizers based on this clock provide frequencies up to 140MHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. 3.6V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. This clock PLL works with a supply voltage of 3V~3.6V. The temperature should be set at -40°C~85°C to ensure reliable performance. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number SL2309 are listed below. There is an available 16 pin on the PLL. RF synthesizers can handle voltages up to 3.3V.
SL2309ZI-1HT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
SL2309ZI-1HT Applications
There are a lot of Silicon Labs SL2309ZI-1HT Clock Generators applications.
- Quenching?
- Instrument
- Coherent carrier tracking
- High-frequency induction heating
- HDD recorders
- Microwave point-to-point systems
- Infotainment systems
- Main oscillator in receiver
- Radiotelephones
- Laptops
