SI5350A-B09007-GT Overview
Clock generator is packaged in the way of Tube. There is a clock generator embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. It contains a total of 10 terminations within RF synthesizer. Clock generator ics require a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generators can take up to 1.89V of power as a maximum supply voltageThis time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. Clock PLL synthesi200MHzes a high-quality 200MHz clock output frequency. A temperature of less than -40°C may cause this clock PLL to fail to start. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.
SI5350A-B09007-GT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B09007-GT Applications
There are a lot of Silicon Labs SI5350A-B09007-GT Clock Generators applications.
- Threshold extension
- Satellite receivers
- Symbol synchronization
- Radio receivers
- Clock generation systems
- Wireless base station for LTE, LTE-advanced
- Broadcast communication
- Wide area power system
- Ultrasound diagnosis
- Fiber Channel
