SI5350A-B08583-GTR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are 10 terminations found in the file. To operate this time clock generator, 1.8V voltage should be applied. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. This clock-generating clock generator ic is able to synthesi200MHze high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5350A-B08583-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B08583-GTR Applications
There are a lot of Silicon Labs SI5350A-B08583-GTR Clock Generators applications.
- Wireless base station for LTE, LTE-advanced
- Signal generator
- Jitter reduction
- Laptops
- Myriad digital applications
- Tracking filters
- Walkie-talkies
- Skew suppression
- Wireless infrastructure
- Cell phones
