SI5350A-B07546-GMR Overview
This clock IC is packaged using the Tape & Reel (TR) method. As part of the 20-VFQFN Exposed Pad package, this clock generator is embedded. It contains a total of 20 terminations within RF synthesizer. Clock generator ics require a voltage of 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would take a maximum supply voltage of 1.89V to operate this time clock generator. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. A clock PLL that starts up at a lower temperature may not function. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5350A-B07546-GMR Features
Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B07546-GMR Applications
There are a lot of Silicon Labs SI5350A-B07546-GMR Clock Generators applications.
- Pagers
- Closed circuit systems
- Digital logic circuits
- Test equipment
- FM demodulation networks for FM operations
- Simple clock clean-up circuits
- Bluetooth receivers
- Laptops
- Aerospace and defense
- Bluetooth transmitters
