SI5350A-B06405-GTR Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package includes this clock generator. There are a total of 10 terminations in this file. This clock generator ic should receive a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. A clock PLL that starts up at a lower temperature may not function. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5350A-B06405-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B06405-GTR Applications
There are a lot of Silicon Labs SI5350A-B06405-GTR Clock Generators applications.
- Coherent detection of the signal
- Simple clock clean-up circuits
- FM demodulation networks for FM operations
- Electronic countermeasures
- Bluetooth receivers
- Signal modulation and demodulation
- FPGA and processor clocks
- Signal demodulation
- VSAT (Small Ground Satellite Station)
- High-speed optical transport network (OTN)
