SI5350A-B06405-GT Overview
Clock ICs are packaged using the Tube method. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains this clock generator. As you can see, it consists of 10 terminations. This clock generator ic should receive a voltage of 1.8V. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There is a maximum voltage of 1.89V for this clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. The supply voltage (Vsup) should be kept above 1.71V for normal operation. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the frequency generator may not start. With ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY, this clock generator produces better clock signals.
SI5350A-B06405-GT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B06405-GT Applications
There are a lot of Silicon Labs SI5350A-B06405-GT Clock Generators applications.
- Cell phones
- Ports
- Simple clock clean-up circuits
- Camera systems
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Notebooks
- Automatic control
- Frequency shifting decodes
- Phase modulation cellular systems
- Clock recovery
