SI5350A-B06033-GTR Overview
Clock generator is packaged in the way of Tape & Reel (TR). 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains this Clock PLL. As a result, frequency synthesizers can be found to contain 10 terminations. Basically, this time clock generator needs a voltage of 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. This clock generator would require a maximum supply voltage of 1.89V. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. This frequency synthesizer requires a supply voltage above 1.71V to be safe. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5350A-B06033-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B06033-GTR Applications
There are a lot of Silicon Labs SI5350A-B06033-GTR Clock Generators applications.
- Televisions
- Remote telemetry and instrumentation
- Quenching?
- Automatic control system test
- Digital circuits
- Antenna automatic tracking
- Test and instrumentation equipment
- Closed circuit systems
- Jitter reduction
- Radar
